|
:: Technical
Details of Polymers ::
|
The list & details of various Elastomer products
manufactured by MOULIK RUBBER INDUSTRIES is given
below :-
1.
Flourinated Rubber ( FKM ) |
iton has the
best proven fluid resistance capacity with four
Basic properties :
1. Highly Heat Resistance
2. Chemical Resistance
3. Low Temperature Flexibility.
4. Resistance to Compression Set.
|
Extreme
Resistance to Temperature
The resistance of FKM to degradation
by heat is outstanding & Simultaneously retains
its good mechanical properties better than any
other available Elastomer.
FKM's continuous service
limits are considered to be over.
3000 hrs. at 230°C * 1000 hrs. at 270°C
* 240 hrs. at 295°C
FKM is mostly serviceable in dynamic application
down to Zero to -10°C F, even if special formulated
FKM use in dynamic application's down to -65°
F also.
Flame Resistence / Resistence
to Sun, Weather, Ozone.
Due to halogen containing polymer FKM has more
resistant to burning than other exclusive Hydro
Carbon Rubber. FKM has best resistence to Sun
Weather and Ozone.
Application of FKM.
Exclusive heat and fluid's resistence assures
its vital application even in Aircrafts, Space
Shuttle, Submarine, Mechanical Seals, Pumps, Valves,
Fertilizer, Chemical and Turbo Engine Manufacturing
Industries uses products like 'O' Rings, Gaskets,
Seals, Bellows, Diahragm, Oil Seal etc.
|
|
2.
Silicone Rubber |
Silicone Rubber is having
very broad service temperature range that exceeds
any other commercial available Rubber. Silicone
Rubber can withstand upto -90 °C temperature
to + 200 °C. It has excellent electricals properties
even at elevated temperature.
Silicone compounded products burns with direct flame
to form a non conducting ash which continues to
function as an insulation. Silicone are testless
non toxic & completely odourless & therefore
used when physicological inertness is required.
They have thus found uses in surgical implants in
the human body. Silicone is having wide range in
hardness from 30° to 80° durometer ( Shore
A ) to design the product at require hardness for
suitable application.
Application of Silicone :
Due to its high dielectric strength & physical
Toughness, Cable connectors, Terminal Covers, Spouts,
Sleeve made from Silicone Rubber gives excellent
results, as silicone componenets are nontoxic food
quality & odourless having huge application
in dairy plants to maintain sanitary condition in
storage & processing Tanks, for Baby feeding
bottle Nipple & Thermoware product such as Flasks,
Water Jugs & Food Processors.
Also most useful in Electrical, Computers, Tele
Communication, Light fittings, Circuit braker, Switchgear,
Space & Defence Industries. |
|
3.
Polyurethene ( Adiprene ) |
Polyurethene Rubber is having high
tensile strength with excellent Oil resistence
& good low temperature flexibility. The most
excellent characteristics of this rubber is abrasion
resistance & high tear strength & also
high elongation at high hardness. Its having temperature
resistance from -25° C to + 95 ° C
Application of Polyurethene Rubber
is for high abrasion resistence, products manufactured
from it includes Coupling Bush, "U"
Type & "V" Type Hydraulic Seals
& Sheet, Pad etc.
|
|
4.
Ethylene Propylene Terpolymers |
E.P.D.M. Rubber has
excellent resistance to steam & withstand a
continuous temperature of 140°C. Its performance
in steam is even better at the same temperature
in dry heat. Even it remains serviceable at high
steam up to 250 PSI, due to excellent resistance
to weathering & ozone. Better elastic properties
& easy processibility are added advantage, high
volume resistivity Dielectric strength are the other
features of components manufactured from E.P.D.M.
Its finds maximum use in Automobile Industry for
Door Sealings, Glazing & Sponge Sealing, hose
for rediator & also used in Textile & Dyeing
Plants as a Door Sealing Gasket for Auto Clave &
Dyeing Machine. |
|
|
|